Type EBHT - 2R
|
|
|
 |
Specification: |
|
Meas. range:
Humidity: 0.0 ... 100.0% r.h.
recommended measurement range (standard device): 30..80% r.H.
recommended measurement range (option -HO): 11..90% r. H.
Temperature: -25.0..50.0°C resp.
-13..122.0°F (selectable) |
|
Resolution: 0.1% r.h. resp. 0.1%
°C
|
|
Accuracy: (at
nominal temperature = 25°C)
Humidity: ± 1% linerarity and ± 2% hysteresis
Temperature: ± 0.4% of the measured value ± 0.3°C |
|
Electric connection: 2 pin
screw-type terminal, no polarity, max. 1.5mm2
|
|
Ambient
temperature: -25...+50°C |
Housing: 70 x 70 x 26mm (H x W x D),
material ABS,
can be mounted on flush-type socket |
Option -HO: "High-humidity sensor (0...100%)"
Option -VO: "On-site display" |
|
Type EBHT - 1R
(sensor
tube at the side, FL=50mm)
Type EBHT - 1K
(sensor
tube at the side, FL=220mm)
Type EBHT - 2K
(sensor
tube pointing downwards, FL=220mm)
|
|
|
 |
Specification: |
|
Meas. range: 0.0 to 100.0% RH
recommended range (standard):
30..80% RH
recommended range (option
-HO): 11..90% RH |
|
Resolution: 0.1% RH or 0.1 °C / °F (selectable) |
|
Accuracy:
(at nominal temperature
25°C)
humidity: ± 1% linearity, ±
2% hysteresis
temperature: ± 0.4% of meas.
value ± 0.2°C |
|
Sensor tube:
14mm diameter,
screwable protection cap with stainless steel gauze (105µ mesh size) Total
length approx. 50mm or 220mm (standard)
Option -FL300, FL400, FL500:extended tube length 300, 400 or 500mm
available (please specify on order) |
|
Housing:
82 x 80 x 55mm (H x W x D), material: ABS, IP rating: IP 65 |
|
Ambient
temperature:
Electronics, housing:
0...70°C
Sensor (sensor tube):
-40..100°C (for short time up to 120°C) |
Electric connection:
Quick-release fixture (plug-in and IP 65) with elbow-type plug
DIN 43650, max. 1.5mm2 |
|
Option Display:
10mm high LCD-display. The option VO additionally has 3 pushbuttons for
calling min/max values and adjustment of measuring parameters (offset and
scale correction). |
|
|
Option -HO: "High-humidity sensor (0...100%)"
Option -LACK: "Encapsulated PC-board
Option -VO: "On-site display"
Option -KABEL: "separated sensor tube": Sensor head (14mm diameter
x 68mm length) connected to housing via approx. 1m teflon cable.
Option -SHUT:
"Heat-absorption head": The weather
protection shield avoids falsification of meas. data due to sun/rain etc.
For outdoor use:
Option "encapsulated PC board" required.
We also recommend using a heat absorption
hat to avoid falsification of meas. data due to sun/rain, etc.
Other types upon request! |
|
|
