|
EASY-BUS - Temperature-Sensor modules
|
|
Option: "On-site display" available against
upcharge
|
|
|
Specification:
| Meas. range: |
0.0 ... 70.0°C |
| Resolution: |
0.1 |
| Accuracy: |
± 0.5°C |
| Housing: |
stream-lined housing for
indoor installation (can be directly mounted on flush-type sockets) |
| Dimensions: |
70 x 70 x 26 mm (H x W
x D) |
|
|
|
|
|
|
Option: "On-Site display" available against
upcharge
identical to EBT-2RE, but with external sensor for lower or higher
temperatures. |
|
Specification:
| Meas. range: |
-50.0 ... 150.0°C |
| Resolution: |
0.1 |
| Accuracy: |
±0.8°C |
| Sensor: |
GMF
30/152 V4A (V4A-cup, 5mm diameter, 50mm long, approx. 1m silicon cable) |
|
|
|
|
|
|
Various sensors (KTY 10-6, KTY 11-6, Pt1000) available.
Option "On-site display" (LCD with 10mm high digits) available
against upcharge.
|
|
Design 1
Design 2
Design 3
Design 4
Design 5
|
Specification:
| Sensor element: |
- semiconductor sensor, KTY 10-6 or KTY
11-6
- Resistance thermometer Pt1000 acc. to DIN IEC
751 |
| Accuracy:
|
(Pt1000
Standard: acc. to DIN class B (±0.3°C at 0°C)
Option: 1/2 DIN (class.A): ±0.15°C at 0°C
1/3 DIN: ±0.1°C at 0°C
1/10 DIN: ±0.03°C at 0°C
|
| Accuracy: |
(at
standard temperature = 25°C)
- KTY 10-6: +0.8 °C (sensor
and electronic)
- Pt1000: +0.2%FS (Electronic) |
| Accuracy (Pt1000): |
Standard: acc. to DIN Kl.B (±0.3°C at 0°C)
Option:
1/3 DIN: ±0.1°C at 0°C |
| Resolution: |
- KTY 10-6: 0.1
- Pt1000: 1°C |
| Electric connection: |
elbow-type
plug acc. to DIN 43650 (IP65),
output 2-wire connection, max. 1.5mm2,
no polarity |
| Sensor connection: |
2-wire
connection possible
(e.g. design 5) |
| Sensor mounting: |
Sensors are
electrically insulated as a standard. |
| Ambient temperature (electronics): |
0...70°C
|
| Temperature coefficient: |
0.05%/°C
|
| Storage temperature: |
-20...+70°C
|
| Housing: |
ABS (IP65) |
| Mounting position:
|
any |
| Fixing: |
by means of screw-thread or
fixing holes in the housing
(accessible after top
cover has been removed) |
| Mounting distance: |
50 x 70mm
|
| Fixing screws:
|
max. shaft diameter:
4mm |
| Thread sizes "G":
|
standard: material V2A,
option: V4A, G1/4", G3/8", G1/2", M5, M6, M8,
M10, M12
other threads upon request! |
| Sensor tube "D":
|
3mm, 4mm, 5mm, 6mm and 8mm - material V4A (1.4571)
|
| Collar tube: |
HL = please specify
length desired (for design 2 only)
(V4A-tube) |
Design types:
| Design 1: |
With threaded pin
"G" for direct screw connection |
| Design 2: |
For higher temperatures,
threaded pin "G" at a distance from housing.
HL = collar tube length. |
| Design 3: |
Indoor or outdoor probe
for direct wall mounting
(encapsulation of electronics required for
outdoor use) |
| Design 4: |
Duct-type probe with
probe tube arranged centrally and pointing
downwards |
| Design 5: |
Transducer for existing
Pt1000 sensors or for applications where probe and housing
need to be separated (e.g. extremely high ambient temperature or due to
design
reasons) |
ordering types (examples):
1. EBT - AP, Des. 1
-50 to +400°C, G=1/2", FL=100mm, D=6mm 2. EBT - AP, Des.
3
KTY 10-6, FL=50mm, D=3mm 3. EBT - AP, Des. 5
Pt1000
Options (against upcharge):
Encapsulation of PC board (for outdoor use)
Extended probe (FL) or collar tube (HL):
Price incl. up to 100 mm, extended length: price
per 100mm
On-site display Other probe constructions upon request - please do not hesitate to contact us!
|
Like EBT - 2R, but with external sensor for higher or deeper temperatures, basic price
Please order separately:
 = data sheet as *.pdf
= instruction manual as *.pdf
 deutsche Beschreibung
Price of the basic article, German V.A.T. incl
:
EUR
112.00
The net price of the basic article EBT - 2RE
is:
EUR
94.12
|
