The universal pocket device for humidity, temperature and dew point measurements with unreached features in this price class until now!
Because of the low power consumption and the integrated min/max value memory the GFTH 200 is perfectly suitable for long term climate surveillances.  For this reason the handy and quick-response measuring device GFTH 200 is especially ideal for superior and most exact measurements. If you use a works calibration certificate (can be ordered against upcharge) referring to humidity accuracies of < 1% are resulted between 20 to 80 % r.h.. Free of charge a temperature value of about 23°C is documented at the WPF4. So this device can be put down to national standards and fulfills highest demands. Within the additional infrared thermometer GIM 530 MS - included in the GFTH 200 Set - it is easy for you to check mould-problem areas on walls etc. The wass can easily scanned by means of the laser beam within very short time. When wall temperature falls below the critical dewpoint (this is, when the wall gets wet), the device alerts with an audible signal. Application: building surveyer, housing industry for destination of dew point and avoid of mold and corrosion. Long-termed surveyance (by min-/max-value memory and extremely low power consumption) of critical zones ... Wintersports: e.g. for snow temperature (with external probe) - device can be used down to -25°C ambient temperature
DIGITAL HYGRO-/THERMOMETER GFTH 200                   Application: Quick-response measuring of air humidity, temperature and                          dew point Measuring of humidity, temperature and dew point with ONE device min-/max-memory for all 3 of the parameters Hold key to memorize the current measuring values of all 3 parameters Automatic off-function can be set from 1 to 120 min. or for continuous operation Extremly low electric power consumption (down to approx. 10 µA) High accuracy by digitally memorized values High-qualified capacitive polymer-humidity sensor Internal temperature sensor: Pt1000 / 1/3 DIN  Additional plug for connecting an external Pt1000 sensor Offset for temperature and humidity for fast post-calibration (if requirable at all) Low battery warning Large 13 mm high LCD-display Large application area: - Humidity: 0.0 to 100.0 % (recommended area: 11 to 90 %) - Temperature: -25.0 to +70.0°C or -13.0 to + 158.0 °F (switchable) Measuring interval to be set from  1 sec. up to 60 sec. (At a measuring interval of e.g. 30 sec. battery service life theoretically about over 2 years at continuous operation)

Device also available completely with works calibration certificate WP4 and case GKK 252 (Article GFTH200 - WPF4)!

Complete set GFTH 200 with infrared thermometer GIM 530MS and carrying case

Price of the basic article, German V.A.T. incl : EUR 331.00


The net price of the basic article  GFTH 200 Set is:  EUR 278.15