|
measuring input: |
universal input for |
| standardized signal: |
4 to 20mA, 0 to 20mA, 0 to 1V, 0 to 2V, 0 to
10V, 0 to 50mV |
|
esistance thermometer: |
Pt100(3-wire), Pt1000 (2-wire) |
|
thermocouples: |
types J, K, N, S, T |
|
frequency, rotational speed: |
TTL-signal, switching contact |
| counter up/counter down: |
TTL-signal, switching contact |
|
serial interface |
| measuring
rate: |
approx. 100 meas./sec. (for standardized signal) resp.
approx. 4 meas./sec. (for temperature and frequency) |
| meas. resp. display
ranges: |
temperature: |
Pt100: |
-200°C to +850°C resp. -50.0 to +200°C |
|
Pt1000: |
-200°C to +850°C |
|
Typ J: |
-170°C to +950°C |
|
Typ K: |
-270°C to +1350°C |
|
Typ N: |
-270°C to +1300°C |
Typ S:
|
-50°C to +1750°C |
|
Typ T: |
-270°C to +400°C |
|
standardized signals: |
-1999 to 9999 digits, scale freely adjustable
-recommended range: <2000 digits |
|
frequency: |
0.000Hz to 10kHz, display freely scaleable |
|
rotational speed: |
0.000 U/min to 9999 U/min
selectable prescaler 1-1000 |
|
counter up/down:
|
countervalue remains on power loss
0 to 9999 (10Mio, with prescaler)
pulse frequency: <10kHz
selectable prescaler: 1-1000 |
|
serial interface:
|
Displaying and controlling from values coming
via the serial interface |
| accuracy (25°C): |
standardized signal:
|
<0.2% FS +1 digit (at 0-50mV:
< 0,3% FS +1 digit) |
|
resistance thermometer: |
<0.5%FS
+1 digit |
|
thermo couples: |
<0.3% FS +1 digit (at type S: <0.5% FS +1 digit) |
|
point of comparison: |
+1°C |
frequency, rotational speed, counter:
|
<0.1% FS +1 digit
|
| outputs: |
2 switching outputs, not electrically isolated |
| switching behavior: |
low-side, high-side or push-pull (selectable) |
| connection data: |
low-side: 28V/1A; high-side: Ub/200mA |
| controller state: |
2-point, 3-point, 2-point with alarm,
min/max alarm to 1 output, min/max alarm to 2 outputs |
| switching point, hysteresis: |
freely adjustable |
| response time: |
<20msec. at nomalized signals
<0.5sec. at temperature and frequency |
| display:
|
approx. 10mm high, 4-digit red LED-display |
| min/max-value memory: |
the max- and min value will be stored |
| push buttons: |
with 3 push-buttons (after removing the front panel)
optional: FS3T, frontpanel with 3 push-buttons for comfortable
configuration.
trouble-free repacement is possible (p.r.t accessories) |
| interface: |
serial interface, elect. isolated, EASYBus compatible |
| miscellaneous:
|
permanent self-monitoring, digital filter function,
measuring range
boundary (limit) |
| voltage supply: |
9 to 28 V DC (standard)
option: elec. insulated voltage supply 11 to 14V or 22 to 27V |
| power consumption: |
max. 30mA (without outputs) |
| nominal temperature: |
+25°C |
| operating temperature: |
-20°C to +50°C |
| relative humidity: |
0 to 80% r.h. (non-condensing) |
| storage temperature: |
-30°C to +70°C |
| housing:
|
glass fibre reinforced Noryl, front panel PC
|
| dimensions: 24 x 48mm (front frame) |
| mounting depth: approx. 65mm (incl. screw-type/plug-in terminal) |
| panel mounting: |
with VA-spring clamp |
| allowed panel thicknesses from 1mm to approx. 10mm |
| panel cut-out: 21.7+0.5 x 45+0.45mm (H x W) |
| connection terminal: |
screw-type/plug-in terminal incl.: |
| 2-pin for interface and 9-pin for other
connections |
| for wire cross sections from 0.14² to 1.5² mm² |
| IP rating: |
front side IP54, with optional sealing rings IP65 |
| noise immunity (EMC): |
EN61326 (appendix A, class B) |
universal display and controller with individually programmable linearisation characteristic line, basic price
