|
Input: |
Pt100 (3-wire)
|
|
Measuring range: |
-50.0 to +200.0°C
|
|
Resolution: |
0.1°C
|
|
Measurig rate: |
approx. 4 measurements/sec.
|
|
Accuracy: |
<0.3% FS +1 digit (at
nominale temperature = 25°C)
|
|
Temperature probe: |
GTF200 Pt100 (at
design TIG 2000 Pt OF not included)
Pt100 probe, DIN class B (+0.3°C at 0°C), stainless steel tube D=5mm, FL=50mm,
approx. 1m silicon cable
|
|
Output: |
voltage-free relay switch
output, change-over contact
Switching performance: 10A (ohmic burden), 250 V AC)
|
|
Switching functions: |
2 point controller
|
|
Switching points: |
freely selectable
|
|
Reaction time: |
<0.5 sec.
|
|
Display: |
approx. 13 mm high, 4-digit red
LED display
|
|
Min/Max value memory |
the minimum and maximum value
are memorized
|
|
Miscellaneous: |
permanent self-monitoring, digital zero point and increasing settlement
possible
|
|
Power supply: |
230 V AC, 50/60 Hz (standard)
optionally other power
supplies possible
|
|
Working temperature: |
-20 to +50°C
|
|
Relatvie humidity: |
0 to 80 % r. h. (non-condensing)
|
|
Storage temperature: |
-30 to +70°C
|
|
Housing: |
standard rack type housing 48x96mm
(front frame)
Installation depth: approx. 115mm (incl. Screw-type/plug-in terminals)
|
|
Panel mounting: |
by fixing clamps
Panel cutout: 43.0 x 90.5 mm (HxW) |
|
Electrical connection: |
ia screw-type / plug-in
terminals
cable diameters from 0.14² to 1.5²
|
|
Protection class: |
front side IP54, with optional
sealing IP 65
|
|
Electromagnetic immunity (EMV):
|
EN 61326 (appendix A, class B) |
|
Options:
(against upcharge) |
|
other power supply:
|
-12 V DC1
- 24 V DC1
- 24 V AC
-115 V AC |
