Universal measuring and controlling device GIR 2002 and GIR 2002 PID -
easy operating, high precision, favourable price - Greisinger electronic
Universal Measuring and
Regulating Device easy to use - high precision -
favourable price
Highlights:
universal input for standardized signals,
frequency, Pt 100, Pt 1000, thermocouples
2 relay switching outputs
1 analog output 0(4) - 20mA or 0 to 10V) (optional)
5 programmable switching functions
electrical isolated power supply for transitter
(24V / 22mA)
serial interface, bus operation
In addition at GIR 2002 PID:
P, I, PI, PD or PID control mode
motorised valve control
continuous regulating output (optional)
GIR 2002 On/Off
- control mode
GIR 2002
PID with PID - control mode
The universal controller GIR 2002 is the
ideal device for simple controlling systems
(on/off switching, relay outputs, ...),The GIR 2002 PID (basic version) supplies
one control output for a 2-point regulation with the control modes
P, I, PI, PD or PID
Due to the universal input and the
various switching functions the controller
can optimally be adapted to the requirements of your system.
A LED switching position display gives
information to the user about the
current status of the switching outputs.
The voluminous automatic self-test and diagnostic system increases the
operational safety and reports system errors
Among others most of the Greisinger transmitters,
rpm sensors and flow rate
sensors can be connected directly to the integrated transmitter power supply (24VDC/22mA) of the controller.
If the device is used as a thermocouple or
resistance thermometer,
the measuring value can alternatively be indicated in °C or °F.
The GIR 2002 has got a
serial, bus-compatible interface,
by which a comfortable programming of the parameters as well as recording
Specification
Outputs:
Please note: Not all options are available for both device types and
not all options
Output 1:
potential-free relay output (standard)
optional Output 1:
- HLR1: control output for semiconductor relay (6VDC/15mA)
Output 2:
potential-free relay output (standard)
optional Output 2:
HLR2: control output for semiconductor relay (6 VDC/15mA)
Output 3:
(not available at standard device type)
optional Output3:
- AAG..3:freely scaleable analog output 0(4)-20mA or 0-10V
switching functions:
5 or 6, selectable
switching points, hysteresis:
freely adjustable
response time:
< 25 msec.< 0.5 sec.
display:
approx. 13mm high, 4-digit
red LED-display
Min-/Max-value memory:
the max- and min value will be memorized
interface:
serial interface, electrical
isolated, EASYBUS
compatible
power supply for sensor:
24 VDC +5%, 22mA (for DC-supply 18 VDC)
miscellaneous:
permanent self-diagnosis, digital filter function,
voltage supply:
230 VAC, 50/60 Hz
(standard)
power consumption:
approx. 6 VA
operating conditions:
-20°C to +50°C, 0 to 80% RH
(non-condensing)
housing:
standard rack type housing 48x96mm (front frame)
panel mounting:
with fixing clamps
electrical connection:
via screw-type/plug-in
terminals
protection class:
front side IP54, with optional
sealing IP 65
electromagnetic immunity (EMC):
EN 61326 (appendix A, class B)
measuring input
measuring / display ranges
accuracy (at nominal
measuring rate
thermocouples:
FeCu-Ni
type J
IEC 584
-70.0°C to +300.0°C
or
-170°C to +950°C
<0,3% FS + 1digit*
approx. 4 meas. / sec.
NiCr-Ni
type K
IEC 584
-70.0°C to 250.0°C
or
-270°C to+1.372°C
NiCr-Si-NiSi
type N
IEC 584
-100.0°C to +300.0°C
or
-270°C to +1-350°C
Pt10Rh-Pt
typr S
IEC 584
-50°C to +1.750°C
Cu-CuNi
type T
IEC 584
-70°C to +200°C
or
-270°C to +400°C
resistance thermometers:
Pt100
3 wires
DIN EN 60751
-50.0°C to +200.0°C
or
-200°C to +850°C
<0,3% FS + 1 digit*
approx. 4 meas. / sec.
Pt1000
2 wires
DIN EN 60751
-200°C to +850°C
action signals / standardized signals:
0 to 1V, 0 to 2V, 0 to 10V
-1999 to +9999 digit, scale freely
adiustable
<0,2% FS + 1 digit*+ 1 digit*+ 1 digit*
approx. 100 meas. / sec.
0 to 20mA, 4 to 20mA
0 to 50mV
frequency:
TTL-Signal
0.000 Hz to 10 kHz, scale freely adjustable
<0,1% FS + 1digit*
approx. 100 meas. / sec.
switching contact NPN
0.000 Hz to 3 kHz, scale freely adjustable
switching contact PNP
0.000 Hz to 1 kHz, scale freely adjustable
rotational speed:
0.000 to 9.999 U/Min.
selectable prescaler: 1to1000,
flow:
0 to 9999 l/s., 0 to 9999 l/min. or 0 to 9.999 l/h
count up / down
0 to 9999 or 0 to 999999 (with prescaler)
<0,1% FS + 1digit*
approx.. 100 meas. / sec.
serial interface:
displaying and controlling from values
coming via serial interface
*= accuracy of reference junction +1°C
Output surview
GIR 2002
GIR 2002 PID
out 1
out 2
out 3
out 1
out 2
out 3
Standard type:
normally
change-over
-
normally
change-over
-
available output options:
against surcharges
HLR1: output 1 =
control output for external SSR
x
x
HLR2: output 2 =
control output for external SSR
x
x
REL3: output 3 =
relay (change-over contact)
x2
x2
HLR3: output 3 =
semiconductor relay connection
x2
x2
NPN3: output 3 = NPN switching output
x1
x1
AAG020/1: output 1 = analog output 0(4)-20mA
x1
out3 not
AAG010/1: output 1 = analog output 0-10V
x1
out3 not
AAG020/3: output 3 = analog output
0(4)-20mA
x1
x1
AAG010/3: output 3 = analog output 0-10V
x1
x1
STA1: output 1 = continuous output
0(4)-20mA
x1
out3 not
STV1: output 1 = continuous output 0-10V
x1
out3 not
STV3: output 3 = continuous output
0(4)-20mA
x1
STV3: output 3 = continuous output 0-10V
x1
1 At continuous/analog output or NPN switching output with option power
supply = 12 V DC or 24 V DC additional surcharge!
2 at output REL3 or HLR3 with option power supply
= 12 V C aditional surcharge!
Universal measuring and regulating device - easy operability - high accuracy - economic price, basic price
Follower of GIR 1002 Pt100 and GIR 1002 NS
Please order the following options separately:
Please order the following accessories separately:
Price of the basic article, German V.A.T. incl
:
EUR
176.70
EUR
148.49
standard type
-HLR1: output 1= controlling output for extern semiconductor relay
-HLR2: output 2= controlling output for extern semiconductor relay
