conductivity measuring device for ultra-pure water GLF 100 RW -
Greisinger electronic
conductivity measuring device
for ultra-pure water
highlights:
the measuring cells:
3 conductivity measuring ranges
low power consumption
automatic measuring range change-over
min/max-value memory
automatic temperature compensation
via integrated temperature sensor
hold function
adjustable
The measuring
cells are designed without any compromise.
By the openings of the sensors the electrodes are well washed around
and well-protected against mechanical influences.
The integrated temperature sensors response very quickly.
Compared with more simple electrode types the measurements are
much faster and much more precise
areas of application:
A universal applicability at highest
standards is guaranteed, since the electrode
material is made of stainless steel
(1.4404, 1.4435).
picture follows within short time!
examination of pure and ultra-pure water
examination of boiler water
functional examination of ion exchangers
measuring ranges:
conductivity;
0 to 2,000µS/cm
0.00 to 20.00µS/cm
0.0 to 100.0µS/cm
temperature:
-5.0°C to +100.0 °C
resistivity:
0.0100 to 0.2000 MΩ*cm
0.010 to 2,000 MΩ*cm
0.01 to 20.00 MΩ*cm
accuracy:
(+ 1 digit, at nominal temperature = 25°C)
conductivity:
typ. 1.5% FS
temperature:
+ 0.3°C
temperature compensation:
off:
deactivated
nLF:
non-linear, acc. to EN 27888
LIN:
linear, with adjustable coefficients
NaCl:
compensation for weak NaCl-solutions acc. to EN 60746-3
reference temperatures: +20°C and +25°C
measuring cell:
2-pole-measuring cell, diameter 12mm
(stainless steel: 1.4404, 1.4435)
with integrated temperature sensor
display:
approx. 11mm high, 4 1/2-digit
LCD-display
working conditions:
device:
-25°C to +50°C, 0 to 95% r.h.
(non-condensing)
measuring cell:
-5°C to +80°C (for short-time: +100°C)
power supply;
9V-battery, Typ 6F22 (in scope of supply)
power consumption:
<1.5mA
housing:
impact resistant ABS, plastic foil keyboard,
transparent panel, front side IP65
dimensions (device):
110 x 67 x 30mm (H x W x D)
weight:
approx. 155g
device functions:
hold function:
by pressing a key the current measuring value
is
"frozen"
min-/max-value memory:
the min. and max. measured value is stored
power-off-function:
device turns off after a certain time, if it is
not used
(adjustable: 1-120min or deactivated)
conductivity meter for ultra-pure water
applications:
checking of pure and ultra-pure water
checking of boiler water
functional check of ion exchangers
Please order the following works calibration certificates separately:
Please order the following accessories separately:
= data sheet as *.pdf
= instruction manual as *.pdf
deutsche Beschreibung
Price of the basic article, German V.A.T. incl
:
EUR
239.00
The net price of the basic article GLF 100 RW
is:
EUR
200.84