Categories



The complete product assortment of the GSG Geologie-Service GmbH

According to your requirements we are arranging together with
you the optimum system for your individual application
Please describe us your requirements, our team will contact you as soon as possible.

You are reaching us by e-mail: 
mail@geologie-service.de
or by:
Phone: +49 (0)931/30 40 8-0
Fax: +49 (0)931/99105 90



GMH 3350 - Details

Home --> Temperature and Humidity --> Temperature, Humidity & Flow


The humidity-/flow-/temperature meter

with integrated alarm and logger function!


Additional features compared to GMH 3330:
  • manual memorizing of measuring values by pressing a key
    (99 data sets max.)
  • Continuous memorizing of 2700 data sets max.
    (=16200 measuring values)
  • Min-/Max-alarm
  • 2 different logger functions
  • Alarm sounded via integrated horn
  • Real-time clock with data and year
  • EX-protection upon request           

                                                                                                                         

GMH3350

 

GMH 3350 (Probes not included)  

Please order probes separately!

(No re-calibration rquired for probe  exchange!)

Specification:

 
Measuring ranges:    Humidity:                     0.0 to 100.0 % r.h.
   Ambient temperature:   -40.0 to +120.0°C
   Surface temperature: -80.0 to +250.0°C
   Flow rate: depending on STS probe
Resolution:  0.1 % r.h.
 0.1 °C / 0.1 °F
 0.1 m/sec.
Accuracy (device):  (±1 digit, at nominal temperature)
    Humidity:                                     ±0. 1 %
    Ambient temperature: (Pt1000): +0.2%
    Surface temperature (NiCr-Ni): ±0.5% v.M. ±0.5°C
    Flow rate:                                    ±0.1 %
Probes: No calibration required for exchange of humidity/temperature or flow rate probe 
Probe connection: 6-pin screened Mini-DIN-socket
NiCr-Ni-connection: Miniature flat-pin plug
Display:  2 four digit LCDs (12.4mm resp. 7mm high) for humidity and temperature (dew point etc.), min./max. values, hold function, etc.
       as well as additional functional arrows.
Working temperature:  -25 to +50°C
Relative humidity: 0 to 95% r.h., non-condensing
Storage temperature:  -25 to +70°C
Min-/Max value memory: memorizing of min. and max. values for humidity, temperature, dew point etc..
Hold function: by pressing a button the current meas. value and the corresponding temperature will be 'frozen'.
Pushbuttons: 6 membrane keys for ON/OFF-switch, selection of measuring range, min- and max-value memory, hold-function, etc.
Interface:  serial interface (3.5mm jack connector) direct connection to RS232 interface of a PC via electrically isolated interface adapter GRS 3100 or GRS3105 (p.r.t. accessories) or via USB3100 to the USB-interface
Power supply:  9V battery, type IEC 6F22 (included) as well as additional d.c. connector (internal pin diameter1.9 mm) for external 10.5-12 V direct voltage supply (Suitable power supply: GNG10/3000)
Low battery warning:  'BAT'
Power-Off-Function:  Device will be automatically  switched off, if no key is pressed/ no interface communication takes place for the time of the power-off delay. 
    The power-off delay can be set to values between 1 and 120 min.; it can be completely deactivated.
Power consumption:  approx. 2.5 mA (with TFS 0100)
Dimensions (device):  142 x 71 x 26 mm (L x W x D) 
Housing Impact-resistant ABS plastic housing, membrane keyboard, transparent panel. 
    Front side IP65, integrated pop-up clip for table top or suspended use.
Weight:  approx. 160 g (battery incl.)
Calculation of dew point:  Dew point temperature calculation based upon current humidity
   and  temperature values.
Adjustment of atmospheric humidity measurements: TFS0100 type probes can be adjusted by means of a humidity normal line to compensate for sensor drift.
NiCr-Ni temperature measuring:  any standard NiCr-Ni-probe can be plugged in. For surface meas. we recommend GOF130VE. A compensation value (to compensate for the loss when transferring heat from the meas. object to the probe) can be set and switched on/off for surface meas, if necessary
Calculation of dew point distance: The dew point distance between the ambient atmosphere and e.g. a wall  surface can be displayed by means of a surface measurement.
Calculation of enthalpy: The enthalpy calculation gives the thermal content h of the air.
Flow measurements:    Two different systems for averaging are integrated:
    - continuous averaging: The average value displayed is calculated using the last measurements
                during the averaging time set.
   - averaging upon request: As soon as the device  has been switched on or the hold-key has
                been pressed, the device starts averaging for the averaging time set.
                During measuring the current measuring value will be displayed.
                As soon as the averaging time has expired the average value will be displayed, the device is in the HOLD mode.
  - selectable averaging time: 1 to 30  seconds
       


The GMH 3350 has the following additional features compared to the GMH 3330:


- Min-/Max-alarm: 
   
The measuring value of the channel selected (humidity, temperature T1, temperature T2, 
    dew point, dew poinat distance or enthalpy) is constantly monitored if they remain within the min./max. limits set.

- Alarm:    3 different alarm settings can be selected:
        "off"         - alarm function not activated
        "on"         - visual alarm via display, interface alarm, alarm sounded via integrated horn
        "no.So."   - visual alarm via display and interface alarm
    
        With the help of the switching module GAM 3000 electric equipment can be switched on/off via the alarm function.
        GAM 3000 can also be configurated as a controller.

- 2 integrated logger functions:
   
2 logger functions can be selected:

    -STORE:     Memorizing of meas. values (humidity, temperature T1, temperature T2, 
                       dew point temperature, dew point distance and enthalpy) and of the current time, 
                       date by pressing a button. 
                       All values can be called up from the memory via keyboard or interface at any time. 
                       Number of memory units: 99 data sets.

    -CYCLE:     Cyclic, continuous memorizing of meas. values (humidity, temperature T1, 
                        temperature T2, dew point temperature, dew point distance and enthalpy).
                        Cycle time adjustable: 1 sec to 1 hour, freely selectable. 
                        Number of memory units: 5400 data sets (16200 meas. values). 
    Use keyboard or interface to start/stop logger. 
    Comfortable readout and display software available for data processing (GSOFT3050) 

-Real-time clock: integrated clock with date and year



THE measurement device for humidity, flow AND temperature with integrated alarm- and loggerfunction.
Lose device without sensors and accessories

Please order the following accessories separately:

  Please order furthermore separately:



= data sheet as *.pdf

= instruction manual as *.pdf

deutsche Beschreibung

Price of the basic article, German V.A.T. incl : EUR 239.00


The net price of the basic article  GMH 3350 is:  EUR 200.84 




News