GMH 3850 - resistive material moisture measuring device - Greisinger
electronic -
Measuring
of material moisture with data logger and user programmable
material curves
GMH 3850
resistive material-moisture meas. device
This instrument is indispensable for the documentation of material state
by quality assurance systems. By means of the integrated
Measuring
principle - moisture:
Resistive material moisture measuring according
to DIN EN
13183-2:2002
Measuring
principle
- temperature external:
thermocouple, NiCr-Ni (TypK)
Measuring
principle
- temperature internal:
NTC
Characteristic
curves:
490
Measuring range -
humidity:
4.0 ..... 100.0% by weight (depending on characteristic curve)
Measuring
range - temperature:
-40.0.....+200.0°C (-40.0.....+392.0°F)
Estimation:
in 9 steps (dry...wet)
Resolution:
0.1% resp. 0.1°C (0.1°F)
Accuracy
device:
(at nominal temperature):
wood: +0,2% by weight
(deviation from characteristic curve at range 6..30%)
building mat.: +0,2%
temperature
(external): +0,5% of meas. value +0,3°C
Temperature compensation:
automatically or manual
Sensor connection:
moisture: BNC
temperature: flat pin
plug (free of thermo-voltage) NiCr-Ni-jack
Nominal temperature:
25°C
perm.
working temperature:
-25 .... 50°C
Storage temperature:
-25 .... +70°C
rel.
humidity:
0..95% r. h. (non condensing)
Display:
two 4-digit LCDs (12,4mm
resp.
7mm high), as well as additional arrows
Pushbuttons:
6 membrane keys
Output:
3-pin jack connector, 3.5mm diameter,
choice between seriell interface or analog output- serial
interface: direct connection to RS232 or USB interface of a PC via
electrically isolated
- analog output: 0-1V, freely adjustable
power supply:
9V-battery, type IEC 6F22 as well as
additional d. c. connector for external 10.5-12V direct voltage supply
Low
battery warning:
´bAt´
power
consumption:
approx. 2.5mA
Dimensions/Weight:
142 x 71 x 26mm, 155g
Housing:
Impact-resistant ABS plastic housing,
membrande keyboard, transparent panel. Front side IP 65, integrated pop-up
clip.
Functions:
Hold:
freezing of the current measuring value on
key-press
Auto-Hold:
Automatic freezing of a constant value
Sort:
limitation of the choice of materials to up to 8
favourites
Auto Power Off:
1..120min, can also be deactivated
Additional functions
compared with GMH 3830:
Logger functions:
manually: 99 data sets (visualisation via keys/display or
interface)cyclic: 10,000 data sets (visualisation via interface)
adjustable cycle time: 1min....1h. The logger starts and stops via
the keyboard or via interface.
Real-time clock
clock with date and year
User curves:
4, freely programmable via interface
Interpolation
points per curve:
approx. 20
Software:
By means of the gratis software GMHKonfig the interpolation points can
be comfortably edited
Accessories:
SET 38
HF
Wood moisture setcontents: case GKK 3500, measuring cable GMK 38,
impact electrode GSE 91, steel nails GST 91, temperature probe GTF 38
SET 38 BF
Wood and building material moisture setcontents: case GKK 3500, measuring cable GMK 38, impact electrode GSE 91,
steel nails GST 91, temperature probe GFT 38, measuring pins GMS 300/91,
brush-type probe GBSK 91, conducting paste GLP 91
SET 38 MPA
MPA-wood moisture set:
Scope of delivery: case GKK 3500, meas. cable GMK
38, reciprocating piston
electrode GHE 91, steel nails GST 91, temperature probe GTF 38
GRS 3100
RS232-interface converter
USB 3100
USB-interface converter
GB 9V
spare battery
GNG 10/3000
Net power supply
GKK 3500
case (394x294x106mm)
Special accessories / spare parts:
GMK 38
Measuring cable (BNC to 2x
banana plug) approx. 1m long
GOK 91
surfaces-measuring caps (pair) to be screwed on GSG91 or GSE91
GHE 91
reciprocating piston
electrode
GMS 300/91
Measuring pins 300mm long
(pair)
GSE 91
impact electrode
GBKS91
short brush-type probe (pair)
for depth down to approx. 100mm
GEG 91
handle for retrofit of
impact electrode
GBSL 91
long brush-type probe (pair)
for depth down to approx. 300mm
GSG 91
retrofitted impact
electrode with front side of GSE 91 and handle GEG91
GLP 91
conducting paste 100ml, for
durface measurements and depth indication in walls, wash floors etx. with
brush probes
GST 91
steel nails (3 pieces;
12, 16 and 25mm long) in plastic case
GSR 91
roller type sensor for surface
measurements on paper or textile webs etc....
GSP 91
Sensor for surface measurements on paper, textiles etc.
GSP 91 ES
Spare sensor element for GSP 91
GSF 38
injection pobe 1m long with handle and
1m connection cable 8for large bales of wood wool, wood chips etc...)
GEF 38
Flat electrode (for floor pavement,
paper etc.... )
GSF 38K
injection pobe 1m long with handle and
1m connection cable (for large bales of wood wool, wood chips etc...)
GTF 38
insulated external NiCr-Ni-temperature
probe (necessary for temperature differences between wood and device)
GSF 38TF
injection probe, length of approx.1m
Accessories for GMH 3810:
GMK 3810
Measuring cable (2x banana plug to 2x banana jack) approx. 1m long, incl.
adapter for GMH 3810. Allows connection of accessories mentioned above (except
for GSF and GTF 38)
GPAD 38
testing adapter
GES 38
insulated NiCr-Ni injection probe
GST 3810
Spare measuring pins (10 pieces) in plastic tin
ST-RN
protection pocket with openings for sensor
connections
GKK 3500
case (394x294x106mm) with punched lining for device and accessories
Resistive measuring material moisture with data logger and user programmable material curves (sensor not incl.)
Please order separately:
Price of the basic article, German V.A.T. incl
:
EUR
387.00
EUR
325.21
