| Ordering type |
Range °C |
Application / Dimensions (mm) |
Response time t90 |
further technical details |
GRS 500
|
-65...+500°C |
Chimney/exhaust probe - conforming to 1. BlmSchV,
Combination probe with bypass and cone for simultaneous measurements
of temperature and O2/CO/exhaust flow via by-pass connection to draft gauge
|
|
dismountable V4A-protection
tube d=8mm,
with conical clamp screw
and bypass in ~45° angle, plastic handle,
silicone
cable, DIN-type flat-pin plug |
GLS 500
|
-50...+500°C |
Soldering tip probe
for direct connection to instrument
|
approx. 2 sec. |
Thermo couple springs (~5mm),
with laser welded meas. point
(wires d=0.3mm),
ceramic tube approx. 6mm,
DIN-type
flat-pin plug |
| GRF 200 |
-50...+200°C |
Tire probe
fast response insertion probe with stop screw (needle adjustable 0 to
14mm).
Suitable for measuring temperature of tires and other soft media
|
approx. 5 sec. |
Aluminium handle,
spiral cable (approx. 1.2m
drawn out),
DIN-type flat-pin plug |
| GTL
130 |
-65...+600°C |
Air/Gas probe
|
approx. 1.5 sec. |
V4A-tube, plastic handle,
silicon cable, DIN-type flat-pin plug |
| GOF
130CU |
-65...+500°C |
Surface probe for straight and solid metal surfaces
|
approx. 3 sec. |
Spring-loaded copper plate,
plastic handle, silicon cable,
DIN-type flat-pin plug |
| GOF
500 |
-65...+500°C |
Surface, immersion, air, gas probe
for any solid surface
|
approx. 5 sec. |
Solid copper plate,
plastic handle, silicon cable,
DIN-type flat-pin plug
|
| GOF
130 |
-65...+900°C |
Surface probe for any solid surface
|
approx. 2 sec. |
2 laser welded NiCr-Ni resilient springs,
ceramic tube, plastic handle, silicon cable,
DIN-type flat-pin plug |
GOF
200HO |
-65...+400°C
|
Surface probe
for any solid surfaces
|
approx. 2 sec. |
Elbow-type construction, thermocouple tapes,
plastic
handle, silicon cable,
DIN-type flat-pin plug |
GOF
400HO
|
-65...+400°C |
Surface probe
for fastest measurements
|
approx. 2 sec. |
flexible thermocouple tapes, plastic
handle,
silicon cable, DIN-type flat-pin plug |
GOF
400VE
|
-65...+550°C |
Surface probe
for fastest measurements
|
approx. 2 sec. |
flexible thermocouple tapes, plastic handle,
silicon cable, DIN-type flat-pin plug |
GTF
400 |
-65...+400°C |
Immersion probe
favourable, fast, elastic (rigid)
|
approx. 3 sec. |
Stainless steel tube 1.5 diameter
(any length against upcharge per
each additional 100 mm) |
| GTF
900 |
-65...+900°C |
Immersion probe
favourable, elastic (rigid)
|
approx. 5 sec. |
Stainless stell tube (V4A), 3 mm
diameter,
L=130mm, silicon cable
(any length against upcharge per each
additional 100m) |
| GTF
1200 |
-200...+1150°C |
Immersion probe for high-temperature
flexible thermowell
|
approx. 3 sec. |
Inconel 1.5mm diameter,
L=150mm,
DIN-type flat-pin plug
electrically isolated
|
| GTF
1200/1300 |
-200...+1150°C |
Immersion probe
flexible thermowell
|
approx. 5 sec. |
Inconel 3mm diameter,
L=300mm,
electrically isolated
|
| GES
900 |
-65...+400°C |
Insertion
probe
favourable, elastic (rigid)
 |
approx. 5 sec. |
Stainless steel tube (V4A) 3mm diameter,
L=130mm,
plastic handle, silicon cable,
DIN-type flat-pin plug |
| GES 130
|
-65...+400°C |
Insertion
probe
for soft media
 |
approx. 3 sec. |
Flexible stainless steel (V4A) needle,
1.5 mm diameter,
plastic handle, silicon cable,
DIN-type flat-pin plug |
| GES
500 |
.65...+550°C |
Insertion
probe
for soft media , picture like GES 130 |
approx. 5 sec. |
Flexible stainless steel (V4A) needle,
3 mm diameter,
plastic handle, silicon cable,
DIN-type flat-pin plug |
| GTF
300 |
-65...+300°C |
Quick-response
measurements in air, liquids,
for small surfaces
 |
approx. 0,3 sec. |
Twisted pair of teflon insulated
thermowell
wires, 0.2 mm diameter each,
welded measuring prod, very flexible,
DIN-type flat-pin plug
Any length (up to 50 m) against upcharge |
| GTF
300GS |
-65...+400°C |
for high
temperatures in gas, air and for
solid surfaces (not suitable for liquids)
|
approx. 0,3 sec. |
Pair of glass fibre insulated thermowell
wires, 0.2 mm diameter each,
DIN-type flat-pin plug
Upcharge for special length of probe |
| GMF
250 |
-65...+250°C |
Magnetic
surface probe
sticks at magnetic materials, resilient measuring probe
with small metal plate, approx. 5 mm dia.
|
approx. 5 sec. |
approx. 1m of twisted teflon insulated wire,
DIN-type flat-pin plug |
GMF 200
|
-65...+200°C
|
Magnetic
surface probe
sticks at magnetic materials, resilient measuring probe
with small metal plate, approx. 5 mm dia.
|
approx. 5 sec. |
fortified version
(higher magnetic force),
firm 2 m silicon cable,
DIN-type flat-pin plug |
| GGF
200
|
-65...+200°C
|
probe for deep frozen products
to screw into deep-frozen prodicts, etc. no predrilling required
 |
ca. 10 sec. |
with screw prod, spiral cable
(approx.
1.2m drawn out),
DIN-type flat-pin plug |
| GTZ
300 |
-65...+150°C |
Clip-on
probe
for temperature measurements at tube surfaces
|
approx. 3 sec. |
for tubes up to approx. 1" diameter,
PVC cable, DIN-type flat-pin plug |
GKF 125
|
- 65... + 200 °C |
Compost probe /
cereal probe etc.
with quick repsonse and though firm
 |
approx. 6 sec. |
V4A-tube 8 mm diam.up to 3mm diam.
at the top,
plastic handle,
silicon cable, DIN-type flat-pin plug |
GAF 200
|
- 65... + 200 °C |
Asphalt probe
/ Insertion probe
for liquids, soft media etc.
 |
approx. 6 sec. |
Flexible insertion needle 1.5 mm
diam. of V4A,
DIN-type flat-pin plug,
rigid connection |
| GTE
130 OK |
-65...+400°C |
Insertion
probe (plug-in type without cable)
for soft media
|
approx. 3 sec. |
Flexible stainless steel (V4A) needle,
1.5 mm diameter,
DIN-type flat-pin plug,
rigid connection |
| GTT
1150 OK |
-200...+1150°C |
Immersion
probe
also suitable for gases/air-use as surface probe limited
|
approx. 3 sec. |
Thermowell, Inconel 1.5 mm diameter,
flexible, DIN-type flat-pin plug,
rigid connection
electrically isolated |
| VKA
1m |
Extension cable 1 m long,
silicon equalising cable (any length upon request).
DIN-type flat-pin plug and DIN-type jack. |
|
