|
| DIGITAL-PH-/MV/Thermometer
Device ready for use incl. pH-electrode GE 100, buffer capsules pH
4 and pH 7, two 100 ml-plastic bottles as well as temperature probes
GTF 1400.
Battery / mains operation
analog output: 1 mV/digit
ATC = Automatic Temperature-Compensation
|
GPRT 1400
AN
|
GPRT 1400 AN - device incl. probe
GPRT 1400 AN GL - device without probe
|
Measuring range:
position 1 (pH): 0.00 to 14.00 pH
position 2 (°C): -20.0 to + 110.0°C
position 3 (mV): -1999 to +1999 mV
Resolution:
0.01 pH, 0,1°C or 1 mV
Accuracy (device):
(pH): +0.02 pH ± 1 digit
(°C): +0,5°C ± 1 digit (range -20 to + 110°C)
(mV): ± 0,2% of meas. values ± 1 digit
Analog output: mV/digit,
connection via 3.5 mm diameter jack
connector (suitable jack connector included)
Input resistance: 1012 Ohm
Working temperature: 0 to 45°C
Nominal temperature: 25°C
Power supply: 9 V battery type IEC 6 F 22 (included)
as well as additional power
supply connector socket 2.5 mm diameter.
Battery service life: approx.100 operating hours
Low battery warning: "BAT"
Display: 3 1/2 digit LCD, approx. 13 mm high
Dimensions: approx. 150 x 86 x 30 mm (H x W x
D);
Impact resistant ABS housing
with integrated pop-up clip for table top
or suspended use, electrode clipped
on at the side.
Weight: approx. 330 g (ready for use)
pH-Electrode: combined measuring and reference electrode type GE 014
with
refillable 3 mol- KCl electrolyte
0-14 pH, 0-80 °C
Attention: The pH-electrode
does not allow for redox-measurements!
Please order redox electrode GE 105
separately, if required
Temperature probe Type GTF 1400AN: silicon temperature probe (KTY
11-6),
electr. insulated in V4A-pipe 5 mm
diameter, approx. 100 mm length,
approx. 1m silicon cable with 3.5 mm
diameter jack connector for connection
to front-side socket. The
instrument is calibrated to cincluded GTF1400AN. If probe is replaced a new
calibration is necessary.
Calibration: 3 turning knobs for
1. Temperature compensation automatically
when probe is plugged in)
2. pH 7-value
3. pH X-value (e.g. pH 4.0, 10.0, or 12.0)
GPRT 1400 AN GL loose device
GTF 1400 AN
spare temperature probe
Device for measuring pH, redox and temperature, battery and mains operation possible, set consisting of
pH-electrode GE 100, buffer capsules pH 4 and pH 7, 2 pcs. 100 ml-plastic bottles, temperature probe GTF 1400 AN incl., without redox electrode
Please order the following accessories separately:
We are recommending for all pH-meters the working and calibration set GAK 1400
Please order furthermore separately:
 = data sheet as *.pdf
= instruction manual as *.pdf
 deutsche Beschreibung
Price of the basic article, German V.A.T. incl
:
EUR
205.00
The net price of the basic article GPRT 1400 AN
is:
EUR
172.27
|
