GTF 101 

Final price can only be determined
after receipt of suitable customer specification.

Please contact us to find out
which diameters are possible
for our various sensors

pre-assembled according to customer's specification!

Available sensors: Pt100 (2-( 3- or 4-wire), NiCr-Ni, Pt1000 and others - please contact us!

Measuring range: : Pt100 (2-( 3- or 4-wire)/Pt1000:-50..+400°C, NiCr-Ni:-200..+1150°C

Tube material: V4A (1.4571)

FL = please specify probe length upon order (in mm)
D  =  diameter 0.5 mm to 8.0 mm.
      - please specify diameter on order (available: 0.5, 1.0, 1.5, 2.0, 2.2, 3.0, 4.0, 5.0, 6.0, 6.7, 8.0)
L   = cable length desired, cable screening
       (e.g.. PVC, silicon, teflon, glass silc etc.) as well as wire quantity  (e.g.. 2-,3 or 4-wire)
       Please speciy on your order

Additonal order specificaton:     a) Which temperature range?
                                             b) Which ambient temperature?
                                             c) plug or othe cable connection?

Please note: depending on tube diameter the sensor design may deviate from figure.

GTF 102 

Final price can only be determined
after receipt of suitable customer specification.

Please contact us to find out
which diameters are possible
for our various sensors

pre-assembled according to customer's
specification

Available sensors: Pt100 (2-( 3- or 4-wire), NiCr-Ni, Pt1000 and others - please contact us

Measuring range: : Pt100 (2-( 3- or 4-wire)/Pt1000:-50..+400°C, NiCr-Ni:-200..+1150°C

Tube material: V4A (1.4571)

FL = please specify probe length upon order (in mm)
D  =  diameter 0.5 mm to 8.0 mm. -
        please specify diameter on order (available: 0.5, 1.0, 1.5, 2.0, 2.2, 3.0, 4.0, 5.0, 6.0, 6.7, 8.0)
L   = cable length desired, cable screening (e.g.. PVC, silicon, teflon, glass silc etc.)
        as well as wire quantity  (e.g.. 2-,3 or 4-wire)
        Please speciy on your order
G   = please specify thread desired: e.g. M5 or G 1/2" (=1.27 cm) etc. Material: stainless steel
        (Available threads: M5, M6, M8, M10, M12, G 1/4" (= 0.635 cm), G 3/8" (= 0.9525 cm), G 1/2" (= 1.27 cm), G 3/4" (= 1.905 cm),
                                    M10x1, M12x1,5, M14x1,5)
GL = specification only required if max. lengths must not be exceeded; unless this is the case glandings acc. to DIN 910 are used;
        for smaller threads certain standard lengths are used

Additonal order specificaton:     a) Which temperature range?
                                             b) Which ambient temperature?
                                             c) plug or othe cable connection?

GTF 103 S - Standard type

Standard design: (Pt100)
    DIN B-head (lacquered aluminium
    G 1/2" = 1.27 cm) thread, FL = 100 mm,
     D = 6 mm diameter    
    Thread and sensor made of V4A (1.4571),
         stainless steel, welded Pt100 Kl. B in 2-, 3-
     or 4-wire connection
    please specify on your order

Special design: ( against upcharge - please enquire)

• possible sensors:
  Pt100 (2-( 3- or 4-wire), NiCr-Ni, Pt1000 
• Any probe length FL: upcharge per 100 mm
• Other connection heads:  made of plastic,
  made of st. steel, design type DE
• Probe insert exchangeable or removable
  by means of a ceramic terminal support.
• Integral head transmitter Pt100 / 4-20 mA
  output 
  
  
• higher accuracies

GTF 200 Pt 100 

Sensor: Pt100, DIN cl.. B (+ 0.3 °C at 0 °C