| Ordering type |
Range °C |
Application / Dimensions (mm) |
Response time t90 |
further technical details |
GRS 500
|
-65°C...+500°C |
Chimney/exhaust probe - conforming to 1. BlmSchV, Combination probe with bypass and cone for
simultaneous measurements of temperature and O2/CO/exhaust flow via by-pass
connection to draft gauge
|
|
dismountable V4A-protection tube d=8mm,
with conical clamp screw and bypass in ~45° angle, plastic handle, silicone
cable, DIN-type flat-pin plug |
GLS 500
|
-50°C...+500°C |
Soldering tip probe
for direct connection to instrument
|
approx. 2 sec. |
Thermo couple springs (~5mm),
with laser welded meas. point (wires d=0.3mm), ceramic tube approx. 6mm, DIN-type
flat-pin plug |
| GRF 200 |
-50°C...+200°C |
Tire probe
fast response insertion probe with stop screw (needle adjustable 0 to
14mm). Suitable for measuring temperature of tires and other soft media
|
approx. 5 sec. |
Aluminium handle, spiral cable (approx. 1.2m
drawn out), DIN-type flat-pin plug |
GKF 250 |
-50°C...+250°C |
cable shoe probe
Picture follows within short time!
|
|
1m teflon cable, lose ends |
| GTL
130 |
-65°C...+600°C |
Air/Gas
probe
|
approx. 1.5 sec. |
V4A-tube, plastic handle,
silicon cable, DIN-type flat-pin plug |
| GOF
130CU |
-65°C...+500°C |
Surface probe for straight and solid metal surfaces
|
approx. 3 sec. |
Spring-loaded copper plate,
plastic handle, silicon cable,
DIN-type flat-pin plug |
| GOF
500 |
-65°C...+500°C |
Surface,
immersion, air, gas probe
for any solid surface
|
approx. 5 sec. |
Solid copper plate,
plastic handle, silicon cable,
DIN-type flat-pin plug
|
| GOF
130 |
-65°C...+900°C |
Surface probe for any solid surface
|
approx. 2 sec. |
2 laser welded NiCr-Ni resilient springs,
ceramic tube, plastic handle, silicon cable,
DIN-type flat-pin plug |
| GOF
200HO |
-65°C...+400°C
|
Surface
probe
for any solid surfaces
|
approx. 2 sec. |
Elbow-type construction, thermocouple tapes, plastic
handle, silicon cable,
DIN-type flat-pin plug |
GOF
400HO
|
-65°C...+400°C |
Surface probe
for fastest measurements
|
approx. 2 sec. |
flexible thermocouple tapes, plastic
handle,
silicon cable, DIN-type flat-pin plug |
GOF
400VE
|
-65°C...+550°C |
Surface probe
for fastest measurements
|
approx. 2 sec. |
flexible thermocouple tapes, plastic handle,
silicon cable, DIN-type flat-pin plug
|
GTF
400 |
-65°C...+400°C |
Immersion probe
favourable, fast, elastic (rigid)
|
approx. 3 sec. |
Stainless steel tube 1.5 average
(any length against upcharge each additional 100 mm) |
| GOF
500 HO
|
-200°C...+500°C |
Surface probe
for quickest measurements, D = 1.5 MTE (K), Inconel 600
Picture follows within short time!
|
|
Spring-loaded copper plate, plastic handle,
silicon cable, DIN-type flat-pin plug |
| GOF
900HO
|
-65°C...+900°C |
Surface probe
for any solid surface
Picture follows within short time!
|
approx. 2 sec. |
2 laser welded NiCr-Ni resilient springs,
bended stainless steel tube, plastic handle
silicon cable, DIN-type flat-pin plug
|
| GTF
900 |
-65°C...+900°C |
Immersion
probe
favourable, elastic (rigid)
|
approx. 5 sec. |
Stainless stell tube (V4A), 3 mm
average,
L=130mm, silicon cable
(any length against upcharge each
additional 100m) |
| GTF
1200 |
-200°C...+1150°C |
Immersion probe for High-temperature
flexible thermowell
|
approx. 3 sec. |
Inconel 1.5mm average,
L=150mm,
DIN-type flat-pin plug
electrically isolated
|
| GTF
1200/1300 |
-200°C...+1150°C |
Immersion probe
flexible thermowell
|
approx. 5 sec. |
Inconel 3mm average,
L=300mm,
electrically isolated
|
| GES
900 |
-65°C...+400°C |
Insertion
probe
favourable, elastic (rigid)
|
approx. 5 sec. |
Stainless steel tube (V4A) 3mm average,
L=130mm,
plastic handle, silicon cable,
DIN-type flat-pin plug |
| GES 130
|
-65°C...+400°C |
Insertion
probe
for soft media
|
approx. 3 sec. |
Flexible stainless steel (V4A) needle,
1.5 mm average,
plastic handle, silicon cable,
DIN-type flat-pin plug |
| GES
500 |
.65°C...+550°C |
Insertion
probe
for soft media
 |
approx. 5 sec. |
Flexible stainless steel (V4A) needle,
3 mm average,
plastic handle, silicon cable,
DIN-type flat-pin plug |
| GTF
300 |
-65°C...+300°C |
Quick-response
measurements in air, liquids,
for small surfaces
|
approx. 0,3 sec. |
Twisted pair of teflon insulated thermowell
wires, 0.2 mm diameter each, welded
measuring prod, very flexible,
DIN-type flat-pin plug
Any length (up to 50 m) against upcharge |
| GTF
300GS |
-65°C...+400°C |
for high
temperatures in gas, air and for
solid surfaces (not suitable for liquids)
|
approx. 0,3 sec. |
Pair of glass fibre insulated thermowell
wires, 0.2 mm diameter each,
DIN-type flat-pin plug
Upcharge for special length of probe |
| GMF
250 |
-65°C...+250°C |
Magnetic
surface probe
sticks at magnetic materials, resilient measuring probe
with small metal plate, approx. 5 mm dia.
|
approx. 5 sec. |
approx. 1m of twisted teflon insulated wire,
DIN-type flat-pin plug |
GMF 200
|
-65°...+200°C |
Magnetic
surface probe
sticks at magnetic materials, resilient measuring probe
with small metal plate, approx. 5 mm dia.
|
approx. 5 sec. |
fortified version
(higher magnetic force),
firm 2 m silicon cable,
DIN-type flat-pin plug |
| GGF
200
|
-65°C...+200°C
|
probe for deep frozen products
to screw into deep-frozen prodicts, etc. no predrilling required
 |
ca. 10 sec. |
with screw prod, spiral cable (approx.
1.2m drawn out), DIN-type flat-pin plug |
| GTZ
300 |
-65...+150°C |
Clip-on
probe
for temperature measurements at tube surfaces
|
approx. 3 sec. |
for tubes up to approx. 1" diameter,
PVC cable,
DIN-type flat-pin plug |
GKF 125
|
-65°C...+200 °C |
Compost probe /
cereal probe etc.
with quick repsonse and though firm
 |
approx. 6 sec. |
V4A-tube 8 mm diam.up to 3mm diam. at the top,
plastic handle, silicon cable, DIN-type flat-pin plug |
GTF
1000 AL
|
-200°C... +1,000 °C |
injection probe
for aluminium melt, non-ferrous heavy metal, etc.
|
approx. 30 sec. |
V4A-tube diameter 6x1.4mm,
L= 1,000mm rigid, plastic handle, spiral cable (approx. 1.2m streteched),
DIN-plug
longer probe tube against upcharge |
GAF 200
|
-65°C...+200 °C |
Asphalt probe
/ Insertion probe
for liquids, soft media etc.
 |
approx. 6 sec. |
Flexible insertion needle 1.5 mm diam. of V4A,
DIN-type flat-pin plug, rigid connection |
| GTE
130 OK |
-65°C...+400°C |
Insertion
probe (plug-in type without cable)
for soft media
|
approx. 3 sec. |
Flexible stainless steel (V4A) needle,
1.5 mm diameter,
DIN-type flat-pin plug,
rigid connection |
| GES
21K
|
-50°C...+250°C |
core temperature / food probe
large white teflon handle, also water and damp tight stainless steel
bend-protection
Picture follows within short time!
|
|
1m teflon cable with lose ends, teflon handle
(use for canteen kitchens, bakeries, butcheries...) |
GTO
130OK |
-65°C...+400°C |
air/gas probe
(probe without cable, as surface probe limited)
Picture follows within short time!
|
. |
NiCr-Ni wires D = 0.5mm,
in the top sealed and face-grinded,
stainless steel tube, DIN-type flat-pin plug |
| GTT
1150 OK |
-200°C...+1,150°C |
Immersion
probe
also suitable for gases/air-use as surface probe limited
|
approx. 3 sec. |
Thermowell, Inconel 1.5 mm diameter,
flexible, DIN-type flat-pin plug,
rigid connection
electrically isolated |
| VKA
1m |
Extension cable 1 m long,
silicon equalising cable (any length upon request).
DIN-type flat-pin plug and DIN-type jack. |
|
For special applications, e.g. aluminium melting, non-ferrous heavy
metal etc., please contact us for special sheating material.
In case you should not find a measuring probe suitable for
your application, make sure to call us.
We will manufacture any probe as far as technically possible!
For measuring temperatures in gas, air and for solid surfaces (not suitable for liquids), measuring range: -65°C bis +400°C, 0.3 sec.
Any probe length up to 50m against upcharge possible. Please order separately:
