<

Pt 100 measuring probes

upon request any technically possible tolerance or construction resp. also as Pt1000 etc, against surcharge

 

ordering type/measuring range	application/dimensions, specification	response time t90	suitable for
GTF 601       -200°C to + 600°C DIN class B	immersion probe for liquids / gases, 4-wires handle like at GTF 401, flexible tube casing, approx. 1 m 4-wires PVC cable, 4-pin Mini-DIN plug diameter 3mm (smaller probe tube diameters upon request)	approx. 10 sec.	GMH 3530 GMH 3750 GMH 3710
GTF 601 1/3	like GTF 601, but 1/3 DIN (+0.1°C at 0°C)
-200°C to +600°C DIN class B	(1/3 DIN accuracy valid for measuring range 0°C to +150°C; 1/2 DIN accuracy within measuring range of -50°C to 0°C resp. +150°C to +300°C)
GTF 401       -50°C to +400 °C DIN class B	immersion probes for liquids / gases, 4 wires rust and acid resistant stainless steel tube, plastic handle,  antikink screwing, approx. 1 m 4-pin PVC cable, 4 pin Mini-DIN plug	approx. 10 sec.	GMH 3530 GMH 3750 GMH 3710
GTF 401  1/3 DIN	wie GTF 401 jedoch 1/3 DIN (+0,1°C bei 0°C)
-50°C to +400 °C DIN class B	(1/3 DIN accuracy valid for measuring range 0°C to +150°C; 1/2 DIN accuracy within measuring range -50°C to 0°C resp. +150°C to +300°C)
GTF 401  1/10 DIN	like GTF 401 but 1/10 DIN (+0.03°C at 0°C) and flexible tube casing, 3mm diameter
-50°C to +400 °C DIN classB	(1/10 DIN accuracy valid for measuring range 0°C to +100°C; 1/3 DIN accuracy within measuring range of -50°C to 0°C resp. +100°C to +300°C; 1/2 DIN accuracy within the remaining measuring range
GES 401	injection probe for soft media, 4 wires specification like GTF 401, but injection top formed like a needle	approx. 10 sec.	GMH 3530 GMH 3750 GMH 3710
-50°C to+ 400°C DIN class B
GES 401  1/3 DIN	like GTF 401 but with 1/3 DIN (+0.1°C at 0°C)
-50°C to+ 400°C DIN class B	(1/3 DIN accuracy valid for measuring range 0°C to +150°C; 1/2 DIN accuracy within measuring range -50°C to 0°C resp. +150°C to +300°C)
GTF 35	immersion probe for liquids / gases, 4 wires rust and acid resistant stainless steel tube, 1 m 4-pin PVC cable, 4 pin Mini-DIN plug	approx. 10 sec.	GMH 3530 GMH 3750 GMH 3710
-50°C to +400 °C DIN class B
GOF 401 Mini	surface probe for solid surfaces, Pt100 ceramic plate 2x2.3mm at front side, stainless steel probe tube, 1 m 4-pin PVC cable, 4 pin Mini-DIN plug	approx. 15 sec.	GMH 3530 GMH 3750 GMH 3710
-50°C to +200 °C DIN class. B
GLF 401 Mini	fast and accurate measurements of ambient air diameter 1.6mm, length of probe tube approx. 15mm, 4 pin Mini-DIN plug	approx. 15 sec.	GMH 3530 GMH 3750 GMH 3710
-25°C to +70 °C DIN class A (= accuracy +0.15°C at 0°C)
sensor accuracies acc. to DIN EN 60751
DIN Kl. B (valid for meausing range: -50°C - +500°C)	+0.3°C at 0°C
Accuracy 1/3DIN (for Pt1000 possible, too)	+0.1°C at 0°C
Accuracy 1/10 DIN (only at Pt100)	+0.03°C at 0°C

Special designs:

The probes can easily be customized to your efforts.

Following specifications are possible against upcharge: 

• longer probe tube
• longer cable (silicon)
• other cable material
• teflon covered probe tube (for probes up to 200m)
• waterproof probe handle (only with  PVC-cable -20°C to +105°C )
• higher sensor accuracy 1/3 DIN Kl. B, for Pt100 and Pt1000
• ISO 9000 ff - works calibration certificate - or DKD certificate!
  Don't hesitate to enquire, which further probes and devices are suitable for these certificates

Please note: customized probes have to be ordered in written form. Return or exchange are not possible.

Immersion probe for liquids / gases, 4-wire, non-corrosive and acid-resistant stainless steel tube,
sensor: -50°C to +400 °C, ca. 10 sec., suitable for devices GMH 3530, GMH 3750, GMH 3710

Please order separately:

• 1/3 DIN Accuracy
• 1/10 DIN Accuracy

deutsche Beschreibung

Price of the basic article, German V.A.T. incl : EUR 40.80


The net price of the basic article  GTF 35 is:  EUR 34.29