Panel instrument for temperature
GTH 1150 EG
Digital thermometer (thermocouple) NiCr-Ni (type "K")-50 up to +1150°C
Specifications
Measuring range:
-50.0 to 1150.0°C
Resolution:
1°C
Sensor:
NiCr-Ni (type K (please
order separately) Additional zero point offset possible via
spindle trimmer at back side of device.
Accuracy (display device):
< 1% ±1 digit (from -20 to +550°C
and 920 up to 1150°C) < 1.5% ±1 digit (from +550°C to 920°C)
from -50 to -20°C according to correction table
Display:
Scan rate :
approx. 3 meas. /sec.
Working temperature:
0 to 50°C
Nominal temperature:
25°C
Relative humidity:
0 to 80 % r. h. (not
condensing)
Storage temperature:
-20 to 70°C
Power supply:
230V 50/60Hz
Housing:
standard rack type 48 x 96 x 100 mm (H x
W x D)
IP rating :
Front
side: IP 54 (with optional o-rings IP65)
Panel cutout:
43 x 90.5 mm (H x W)
Connection terminal:
screw-type/plug-in
terminals, max. terminal range 1.5 mm2
Noise immunity (EMC):
The GTH1150EG is conforming to the regulations determined by the Council for the
Approximation of the Legislation amongst the Member Countries concerning EMC
(89/336/EWG). The device meets EN50081-1 and EN50082-2
requirements. Additional fault: <1%
Options (against upcharge):
12 or 24 or 115V AC
GGD 4896 Additional sealing for panel-mounting to meet IP 65
all NiCr-Ni (type "K") sensors without plug but with ferrule
custom built sensors available
display panel for temperature, digital thermometer (Thermoelement) NiCr-Ni (Typ K) (sensor not incl.)
Please order separately:
Price of the basic article, German V.A.T. incl
:
EUR
80.30
EUR
67.48
power supply: 230V 50/60 Hz (standard)
power supply: 12VDC (against upcharge)
power supply: 24VDC (against upcharge)
power supply: 12VAC (against upcharge)
power supply: 24VAC (against upcharge)
power supply: 115VAC (against upcharge)
