|
EASY-BUS-accessories
EBSK01
(special plug with approx. 1 m of
cable for connection of one EASYLOG, EBN... to the EASYBUS)
EBSK03
(special plug with approx. 3 m of
cable for connection of one EASYLOG, EBN.. to the EASYBUS)
(Please note: EASYLOG and EBN .. will be supplied without
connection cable. The GSOFT 40 K includes a connection cable EBSK01.
Please order EBSK01 resp. EBSK03 as
required in case of permanent bus connection!)
ESK-1
(external starting key, independent from mains supply, to start logger in the starting mode St.Et)
(Power supply: 9 V DC - via integrated 9 V battery,
dimensions: 107 x 62 x 26.5 mm (H x W x D))
Examples for application: In the
office the EASYLOG will be set for monitoring functions by means of the GSOFT 40
K; it will be prepared to start
by setting it to "external Start (St.Et)". After the logger has been
taken to the site of application the starting key will be
connected. Press relevant button to start logger. The starting key may now be
removed again.
GWH 40K
(wall
suspension with lock as protection against theft
(suitable for all EASY-LOGs (except of EASY-LOG 40NS W), EBN/K-...
and
GIA0420WK)
GWH 10 (simple wall suspension, made of
stainless steel, for all EASY-LOGs - except EASY-LOG 40NS W)
(Mount wall suspension at the monitoring point; EASYLOG may
now be easily put in)
EBW1
(converter 230 V for
connection of max. 9 modules to a PC
Converter RS232 - EASY-BUS, for the
connection of max. 9 modules to the RS232-interface (9-pin Dsub-plug) of your
PC.
(Poer supply: 230VAC
/ 50Hz, Dimensions: 112 x 80 x 45 mm (H x W x D)
(Scope of supply incl. 9 -pin
Dsub-extension cable. Please note: order Dsub9 -> Dsub25, if required - GSA 9S-25B)
EBW2
(converter for the connection of
one module to a PC - independent from mains supply)
Converter RS232 - EASY-BUS, independent
from mains supply - for the connection of one module (e.g. EASYLOG) to the
RS232-interface
(9-pin Dsub-plug) of your PC.
(Power supply: 9VDC - via integrated 9V-Batterie,
Dimensions: 107 x 62 x 26.5 mm (H x W x D)
(Scope of supply incl. 9-pin
Dsub-extension cable)
Please note: order Dsub9 -> Dsub25,
if required! - GSA 9S-25B)
EBW9 (set consisting of converter EBW1 and
recording software EBS 9M)
EBW64 (converter for connection of max. 64 modules to the RS232 interface of a PC incl. recording, monitoring and
display software for up to 240
sensor modules (EASY Control)
EBW240
(converter for connection of
max. 240 modules to the RS 232 interface of a PC incl. recording, monitoring and
display software for up to 240
sensor modules: EASY Control.
GSA 25S-9B (Connection-adapter: 25-pin
Dsub-plug <=> 9-pin Dsub-socket).
GSA 9S-25B (Connection-adapter: 9-pin
Dsub-plug <=> 25-pin Dsub-socket).
EB2000MC (EASY-BUS-display and monitoring
device for 9 channels, incl. level converter PC - EASYBUS).
GRS 01/9
(interface cable for EB2000MC
for connection to 9-pin RS 232 interface of a PC
- adapter GSA 9S-25B to snap on
to 25-pin PC interface will also be supplied
GRS02/9: interface adapter RS232 to connect an EBW2 with a MODEM...
MODEM 1000 analog standard modem
with protection by identification for distant monitoring of EASYBUS via the
analog telephone net
(supply includes power pack, TAE-cable,
25 pin Dsub-cable and GSA 25 S-9B)
MODEM 2000 HS analog
top-rail-hat modem
with protection by identification and SMS alarm and for distant monitoring
of EASYBUS via the analog telephone net (supply includes
power pack, TAE-cable,
25 pin Dsub-cable and GSA 25 S-9B,
please order power pack separately!).
MODEM 3000 GSM GSM modem (for D1 or D2)
with protection by identification and SMS alarm and for distant monitoring
of EASYBUS via the 900MHz radio net (supply includes 9 pin
Dsub cable, please order aerial and power pack required separately!
Antenne 3000 GSM-antennae
with fixing
GSK 9S-9S-NM
null modem cable (9-pin) to connect a modem to EBW 1 ... EBW
240
GNG 12/300 top-hat rail power pack for MODEM 2000 HS / 3000 GSM
GNG 12 - LE plug-in power pack for MODEM
2000 HS / 3000 GSM
 |
EBUW 232 A
Alarm monitor module with integrated
protocol conversion for EASYBUS. The EBUW 232A monitores up to 240
EASYBUS-modules and checks their alarm conditions. If an alarm is present,
the alarm output will be set. Additionally it is possible to operate a
switching module EBB4out (with this module separate alarm relais can be
set for min and max alarm).
A protocoll conversion is integrated, which reconstructs previously
splitted (eg by modem connection) protocols, to be conform to the EASYBUS
demands. The module just has to be inserted to the cable connection
beteween EASYBUS level converter and the MODEM/Gigaset module or PC.
Power supply: 6-12V DC, max. 10mA (over connection cable)
Switching output: NPN-open collector, max. switching capacity:
24V, 50mA
|
GNR 232 A Power
supply and relay module for EBUW232A
Input: 230V, 50/60Hz, Output:
12V DC+/-5% (regulated)25mA, Connection: screw-type terminal, Relay
output: Volt-free changeover contacts, switching current max. 10A ohmic load,
Dimensions: 96x61x60mm
GNG 10-LE plug-in power supply 10V/10mA (for
applications where
the switching output is not used directly or not)
VSL2P (twisted special cable for
EASYBUS-system, cross section: 2 x 0,75 mm2)
AKL1P (special branch terminal for
connection to VSL2P)
EBS9M (Windows-Software
for recording and archiving of max. 9 sensor modules
EASYControl (Windows-software
for recording, monitoring and archiving of max. 240 sensors of the EB-series)
EASYBUS.dll (Windows-function library for
interface communication EASYBUS - PC, to write your own programs)
GSOFT 40K (Windows-Software for EASY-LOG
for settings, data read-out and printing of logger data (diagram or table). Incl.
EASYLOG-connection cable EBSK01)
Simple wall mounting of stainless steel for all EASYLOG-models instead of EASYLOG 40 NS W
 = data sheet as *.pdf
 deutsche Beschreibung
Price of the basic article, German V.A.T. incl
:
EUR
14.85
The net price of the basic article GWH 10
is:
EUR
12.48
|
