|
Air oxygen measuring transducer
OXY 3690 MP
|
 |
| |
|
Specification:
|
|
| Measuring ranges: |
oxygen concentration: 0.00 to
100% O2
Temperature: -20.0..50.0°C
|
| Accuracy(at nominal
temperature 25°C): |
oxygen: +0,1%
+ 1 digit
Temperature: +0,1°C +
1digit
|
| Output signal (only O2): |
4-20mA (2-wire - standard)
0-10V (3-wire - option)
|
| electric isolation:
|
input electrically isolated
|
| auxiliary energy:
|
12..30 V DC (at output 4-20mA)
18..30 V DC (at output 0-10V -
Option)
|
| Perm. impedance:
|
(at 4-20mA): RA[Ohm]=
UV[V]-12V /0,02A |
| Perm. load:
|
(at 0-10V): RL>3000
Ohm
|
| working temperature:
|
0 to 50°C |
| storage temperature:
|
-20..70°C |
| Relative humidity:
|
0 to 95% r. F.
|
| Reverse voltage
protection: |
50V permanently
|
| Display: |
approx. 10mm high, 4-digit
LCD
|
| Housing:
|
ABS (IP65 - with the exception of
sensor plug)
|
| Dimensions:
|
82x80x55mm (without elbow type
plug and sensor plug)
|
| electric connection: |
elbow-type plug acc. to DIN 43650
(IP 65), max. wire coross section: 1.5mm², wire diameter from 4.5 to 7mm
|
|
Sensor connection: |
5pin jack connector, screwable
|
| Calibration: |
1-point calibration: extremely simple quick calibration in atmospheric air |
| Air pressure
compensation: |
500..2000hPa, manually input Compensation of the
dipendence of the O2-concentration and the air pressure |
| |
|
Specification sensor GGO369 S/MU:
|
|
| Sensor: |
oxygen sensor GGO369 S/MU
|
| Sensor element: |
Integrated in housing,
exchangeable. Suitable for air resp. high CO2-concentrations
|
| Connection cable: |
95% in 10sec., depends on
temperature
|
| Operating life: |
Warranty for sensor element:
18 month (assuming appropriate usage according to the manual)
|
| Operating pressure:
|
500 bis 2000hPa (static). For
air- and gasstream use the oxygen sensor GOO 369/MU
|
| working temperature:
|
-5 to +50°C (sensor)
|
| rel. Humidity:
|
0 to +95% r. H. (non-condensing)
|
| Dimensions of housing:
|
d=approx. 40mm, housing with
M16X1-screw thread (sensor can be connected to line tubes by means of an
included adapter piece)
length: approx. 103mm (153mm incl.
anti-buckling glanding)
|
| Weight:
|
approx. 155g
|
| connecting cable:
|
approx. 1.3m, with 5pin plug,
screwable
|
| working temperature: |
-5 to 50°C (sensor)
|
| storage temperature: |
-15 to +60°C
|
Options an spare parts (against
upcharge):
AV010: output signal 0-10V
GOO: oxygen sensor GOO369S/MU,
open sensor type, suitable for air and gas-stream
GOEL369S spare sensor element
Air oxygen measuring transducer incl. oxygen sensor GGO 369S, basic price
Please order following accessories separately:
 = data sheet as *.pdf
= instruction manual as *.pdf
 deutsche Beschreibung
Price of the basic article, German V.A.T. incl
:
EUR
385.00
The net price of the basic article OXY 3690MP
is:
EUR
323.53
|
