flow meter (rotor) RRI- 010/ RRI-025 - Greisinger electronic
flow meter
(rotor)
properties: the flow
meter measures the flow rate with an impeller rotating due to the
flow. The flow rate is proportional to the rotational frequency. The
rotational
speed is measured by an inductive proximity switch.
no magnets, but with inductive sensor
largely wear-free due to high-quality ceramic axis and bearing
output signal NPN (optional PNP)
no inlet and outflow zone needed
uncomplicated flow measurement
intrinsically safe behaviour
modular design with several connecting systems
connections plug- and pivotable
area of application:
Sensor suitable for
water
oil (viskosity up to 10 mm2/s (10 cSt.))
RRI - 010 / ...
(DN10,
G3/8 (= 0.9525 cm))
RRI - 025 / ...
(DN25, G1 (= 2.54 cm))
measuring principle:
rotor (inductive sensor)
constructions:
bore
measuring range
pulse rate *1
RRI-010/020
2mm
(0.1) 0.5 to 1.5 l/min.
ca. 10,200 Imp./l
RRI-010/050
5mm
(0.2) 2.0 to 10 l/min.
ca. 3,345 Imp./l
RRI-010/070
7mm
(0.4) 2.0 to 12 l/min.
ca. 1,755 Imp./l
RRI-025/080
8mm
(2) 3 to 30 l/min.
ca. 1,216 Imp./l
RRI-025/120
12mm
(3) 5 to 60 l/min.
ca. 607 Imp./l
RRI-025/160
16mm
(4) 6 to 100 l/min.
ca. 252 Imp./l
*1 precise value
on type plate, max. variability within a batch +10%
accuracy:
+ 3% of meas. value (in spec. meas. range)
repeatability:
+ 1% of final vaue
pressure decrease:
max. 0.5bar (at max. flow)
working pressure:
max. 16bar
output signal:
NPN (optional PNP)
auxiliary energy:
5 to 30 V DC, max. 10 mA
(cloesed current, without load)
electrical connection:
2m cable (optional: 4-pole locking plug M12x1)
working temperature:
0°C to +60°C
protection class:
IP 67
mech. connection:
norminal bore
threat
RRI-010...
DN 10
G 3/8 (= 0.9525 cm), female thread*2
RRI-025...
DN 25
G 1 (= 2.54 cm), female thread*2
*2 other threat
types (male thread, ...) or materials for connectors upon request
mounting position:
horizontal or ascending direction of flow
materials:
housing:
Questra (DN25) / PPS (DN10)
connection, rotor;
PVDF
bearing:
Iglidur X
axis:
ceramics Zr02-TZP
seal:
viton
dimensions:
84 x 29 x 88mm (RRI-010...)
110 x 73 x 103mm (RRI-025...)
flow transmitter (rotor), sensor suitable for water, oil up to viscosity 10 mm²/s (10 cSt.), basic price
= data sheet as *.pdf
deutsche Beschreibung
Price of the basic article, German V.A.T. incl
:
EUR
247.50
The net price of the basic article RRI-010
is:
EUR
207.98
RRI-010/020: bore 2mm, meas. range (0.1) 0.5-1.5 l/min., pulse rate approx. 10,200 pulses/l
RRI-010/050: bore 5mm, meas. range (0.2) 2.0-10 l/min., pulse rate approx. 3,345 pulses/l
RRI-010/070: bore 7mm, meas. range (0.4) 2.0-12 l/min., pulse rate approx. 1,755 pulses/l
RRI-025/080: bore 8mm, meas. range (2) 3 to 30 l/min., pulse rate approx. 1,216 pulses/l
RRI-025/120: bore 12mm, meas. range (3) 5 to 60 l/min., pulse rate approx. 607 pulses/l
RRI-025/160: bore 16mm, meas. range (4) 6 to 100 l/min., pulse rate approx. 252 pulses/l
NPN
PNP
connection 2m cable
connection 4-pole locking plug M12 x 1