|
Pressure measuring
transducer
for over/under and absolute pressure
Description:
Piezo-resistive pressure sensor with temperature compensation.
Completely welded and stainless steel design.
Measuring element in silicon oil AK 100 (up to 16 bar) over 25 bar;
thin film gauge
|
|
S-10 REL
|
Standard, zero output at ambient pressure |
S-11 REL
|
Flush, zero output at ambient pressure |
S-10 ABS
|
Standard, absolute, electric zero at vacuum |
S-11 ABS
|
Flush, absolute, electric zero at vacuum |
Meas. ranges: in bar (other
values upon request)
S-10 REL/ S-11 REL: 0.1, 0.25,
0.4, 0.6, 1, 1.6, 2.5, 4, 6, 10, 16, 25, 40, 60, 100, 160, 250, 400, 600, 1000
S-10 ABS/S-11 ABS: 0.25, 0.4, 0.6,
1, 1.6, 2.5, 4, 6, 10, 16
Overload and bursting pressure::
Meas. range (bar): 0.1, 0.16, 0.25, 0.4, 0.6,
1, 1.6, 2.5, 4, 6, 10,
16,
25..600, 1000
Overload (bar): 1 1.5
2 2 4 5
10 10 17 35 35
80 2 x meas. range 1500
Output signal: 4-20 mA (option:
0-10V - others upon
request)
Auxiliary energy:
10 ... 30 V DC (14..30V DC for output 0-10V)
Permissible impedance: RA
(Ohm) = UV (V) - 10 V / 0.02 A (for output 4-20mA)
RA
(Ohm)> 10kOhm (for output 0-10V)
Accuracy:
devitation from parameter (%of span): <0.5 (setting of cut-off
point), <0.25 (setting of tolerance band BFSL)
Repeatability (%of span): <0.05
Stability per year (% of span): <0.2 (under reference conditions)
Hysteresis (%of span): <0.1
permissible temperature of media: -30 ...
+100 °C (refer to options)
Operating temperature: -20 ... +80 °C
(compensated area)
for other operating temperature
p.r.t. accessories
Filling: KN77, food safe
Temperature coefficient: approx. +0.02 % FS / K
(depending on meas. range)
Housing: stainless steel 1.4435 (IP 65)
Pressure connection: Please specify
on order
Type S-10: G 1/2A (= 1.27 cm), G
1/4 (0.635 cm)
Type s-11: G1A (= 2.54 cm) (up to
2.5
bar), G 1/2 A (= 1.27 cm) (from 4-600 bar)
for others p.r.t special design-types
- we reserve the right to make technical changes!
Mounting position: any
Electric connection: Standard via
elbow-type plug acc. to DIN 43650
(elbow-type plug resulting in longer
device - p.r.t. dimensioned drawing showing elbow-type plug)
Electric protections: Reverse voltage
protection, over voltage and short-circuit protection.
Special design-types against upcharge:
|
Operating temperature up to 125 °C (S-10 and S-11
REL)
Operating temperature up to 150 °C (for S-11 only)
Pressure connection: Type S-10 other
threads upon request!
Output signal: 0-10 V (3-wire, feed: 14 ...
30 V DC) and others upon request
Attention: Please always note
pressure connection desired on your order as this may result in technical
changes!
EX-protection: upon request!
Pressure measuring transducer for over-, under and differential pressure. Standard design, electric zero at atmospheric pressure, basic price
Please order separately:
Please note in the textbox the sensor connection and measuring range required
 = data sheet as *.pdf
= instruction manual as *.pdf
 deutsche Beschreibung
Price of the basic article, German V.A.T. incl
:
EUR
297.00
The net price of the basic article S-10 REL
is:
EUR
249.58
|
