|
Pressure measuring
transducer
for over/under and absolute pressure
Description:
Piezo-resistive pressure sensor with temperature compensation.
Completely welded and stainless steel design.
Measuring element in silicon oil AK 100 (up to 16 bar) over 25 bar;
thin film gauge
|
|
S-10 REL
|
Standard, zero output at ambient pressure |
S-11 REL
|
Flush, zero output at ambient pressure |
S-10 ABS
|
Standard, absolute, electric zero at vacuum |
S-11 ABS
|
Flush, absolute, electric zero at vacuum |
Meas. ranges: in bar (other
values upon request)
S-10 REL/ S-11 REL: 0.1, 0.25,
0.4, 0.6, 1, 1.6, 2.5, 4, 6, 10, 16, 25, 40, 60, 100, 160, 250, 400, 600, 1000
S-10 ABS/S-11 ABS: 0.25, 0.4, 0.6,
1, 1.6, 2.5, 4, 6, 10, 16
Overload and bursting pressure::
Meas. range (bar): 0.1, 0.16, 0.25, 0.4, 0.6,
1, 1.6, 2.5, 4, 6, 10,
16,
25..600, 1000
Overload (bar): 1 1.5
2 2 4 5
10 10 17 35 35
80 2 x meas. range 1500
Output signal: 4-20 mA (option:
0-10V - others upon
request)
Auxiliary energy:
10 ... 30 V DC (14..30V DC for output 0-10V)
Permissible impedance: RA
(Ohm) = UV (V) - 10 V / 0.02 A (for output 4-20mA)
RA
(Ohm)> 10kOhm (for output 0-10V)
Accuracy:
devitation from parameter (%of span): <0.5 (setting of cut-off
point), <0.25 (setting of tolerance band BFSL)
Repeatability (%of span): <0.05
Stability per year (% of span): <0.2 (under reference conditions)
Hysteresis (%of span): <0.1
permissible temperature of media: -30 ...
+100 °C (refer to options)
Operating temperature: -20 ... +80 °C
(compensated area)
for other operating temperature
p.r.t. accessories
Filling: KN77, food safe
Temperature coefficient: approx. +0.02 % FS / K
(depending on meas. range)
Housing: stainless steel 1.4435 (IP 65)
Pressure connection: Please specify
on order
Type S-10: G 1/2A (= 1.27 cm), G
1/4 (0.635 cm)
Type s-11: G1A (= 2.54 cm) (up to
2.5
bar), G 1/2 A (= 1.27 cm) (from 4-600 bar)
for others p.r.t special design-types
- we reserve the right to make technical changes!
Mounting position: any
Electric connection: Standard via
elbow-type plug acc. to DIN 43650
(elbow-type plug resulting in longer
device - p.r.t. dimensioned drawing showing elbow-type plug)
Electric protections: Reverse voltage
protection, over voltage and short-circuit protection.
Special design-types against upcharge:
|
Operating temperature up to 125 °C (S-10 and S-11
REL)
Operating temperature up to 150 °C (for S-11 only)
Pressure connection: Type S-10 other
threads upon request!
Output signal: 0-10 V (3-wire, feed: 14 ...
30 V DC) and others upon request
Attention: Please always note
pressure connection desired on your order as this may result in technical
changes!
EX-protection: upon request!
Pressure measurement transducer for over, under and differential pressure. Flush design, electric zero at ambient pressure, basic price
Please enter the specifications wished in the textbox
Please order separately:
Please note in the textbox the sensor connection and measuring range required
 = data sheet as *.pdf
= instruction manual as *.pdf
 deutsche Beschreibung
Price of the basic article, German V.A.T. incl
:
EUR
356.00
The net price of the basic article S-11 REL
is:
EUR
299.16
|
