|
Flow measuring transducer
with Hall-effect sensor
for liquids
Specification:
- minimum size, maximum accuracy
- easy installation
- installation in any position possible
- optimum-quality due to high-quality materials used
- no maintenance
Range of application:
- manufacturing of oil and gas burners, flow heaters
- manufacturing of cooling systems
- automotive technology (measuring of petrol consumption, etc.)
- manufacturing of dish washers and washing machines
- laboratories
- chemical works, pharmaceutical industry
- agriculture and horticulture
|
|
VISION 2008
|
cpl. with 1 m of cable, ready for plug-in |
Rotor-position scanning: Hall-Sensor
Meas. range: 1.5 - 25 litres /
minute
Resolution: approx. 1000 pulses / litres
Measuring agent: clean liquids,
we recommend filtering with approx.
20 bis 40 micron
Viscosity: up to approx. 15 cSt.
Accuracy: + 3 % ranging from 10
- 100 % with Qmax
Repeatability: <0.5 %
Working temperature: -20 to +100 °C
Operating pressure: 25 bar
Mx. pressure: 200 bar
Electric connection: AMP Faston 2.8/6.3
mm
Auxiliary energy: 5-24 V DC
Power consumption: approx. 8 mA
Multiplier (R):
1-2.2 kOhm
Output signal:
Frequency 5-416 Hz, open collector NPN
Output current:
max. 20 mA
Material:
Housing: Grilamid TR 55 (PA
12)
Rotor: Grilamid (PA12 Ferrit)
Bearings: PTFE 15 % Graphit
Pressure connection: thread G 3/8" (= 0.9525 cm)
DN: 8 mm
Weight: approx. 15 g
Dimensions:
approx. 55 x 17 x 30 mm (H x W x D)
|
Flow meter with Halleffekt-sensor for liquids completely.
 = data sheet as *.pdf
= instruction manual as *.pdf
 deutsche Beschreibung
Price of the basic article, German V.A.T. incl
:
EUR
88.40
The net price of the basic article VISION 2008
is:
EUR
74.29
|
