|
DKD-certificates / Certificates of
calibration - for ISO 9000 ff
based on domestic standards
| |
for return to national standards |
| 1. recalibration (without
certificate) |
2. Works calibration certificate
DIN EN ISO/IEC 17025 |
3. DKD-certificate |
| After longer terms of using, it is recommended, to send in
the device (e. g. humidity) for readjusting. The device will be cecked up
completely and, if needed, it will be re-calibrated. |
The DIN EN ISO 9000ff claims a traceable calibration of the
tesing aid. This certificate of calibration i a cost saving alterneative to
the DKD certificate. |
DKD-Certificate always fulfils mod-, assembly- and
method-standards claimed by the German Calibrationing Service |
| |
|
|
| What certificate do
you need? |
| |
| Certificate of calibrations is adequate
for using teh device as a testing aid or measuring device for QS issues
claimed in the DIN EN ISO 9000ff. It also may be used for measuring-units
the DKD has no accreditation for. |
| |
| DKD-Calibration Certificate is
recommended for measuring devices with higher accuracy, like the device is
used for calibrating, adjusting or readjustin other devices. Also some
internal business company standards max instruct the unst of a DKD
certificate. |
| |
| 1.
Recalibration: |
| Recalibration of the device including a
complete mode of operation check |
| |
| 2. Works
calibration certificate: |
Certificates of calibration are available for
all handheld instruments marked with the symbol
.
For measuring transducers resp. combinations of displax instrument snad
sensors/transducers the are also possible. |
| |
DKD-Calibration-Certificates:
Temperature: (prices upon request!):
DKD-Calibration certificate;
each meas. point against surcharge
Pressure: (prices upon request!):
Over pressure: -1..100bar (incl. 10 meas. values increasing and decreasing)
Absolute pressure: -1..100bar (incl. 10 meas. values increasing and decreasing)
All included - device and works
calibration certificate:
GTH 175/Pt - WPT2
(immersion probe)
incl. certificate of calibration WPT2 and case GKK 252.
meas. points: 0°C / +70°C
GTH 175/Pt - WPT3
(immersion probe)
incl. certificate of calibration WPT3 and case GKK 252.
meas. points: -20°C / 0°C / +70°C
GTH 175/Pt-E - WPT3
as above, but insertion probe
GFTH 200 - WPF4
incl.
certificate of calibration WPF and case GKK 252.
meas. points: approx. 20% / 40% / 60% / 80%r.F. increasing and
decreasing
GMH 3330
incl. TFS0100-
WPF4
incl.
certificate of calibration WPF4 and case GKK3500.
meas.
points: approx. 20% / 40% / 60% / 80% r.H. increasing and
decreasing
GMH 3160-07
WPD5
GMH 3161-12
WPD5
GMH 3161-13
WPD5
incl.
certificate of calibration WPD 5 and case GKK 3000
meas. points: 5 points increasing and decreasing
GTH 1170 incl. GTF 900 - WPT
incl. certificate of calibration WPT (with measuring points: 0/100/250/500°C)
and case GKK 1100
Works Certificate of calibration (f. IS09000 ff.)10 points increasing, 10 points decreasing
 = data sheet as *.pdf
 deutsche Beschreibung
Price of the basic article, German V.A.T. incl
:
EUR
161.00
The net price of the basic article WPD 10
is:
EUR
135.29
|
